Release Notes

3. To view Open Existing DVM Repository window, click Open Existing
Repository button from the Repositories tab. Enter the path of repository in
the Path field that corresponds to the volumes with assigned letters (step 2).
4. Click Open.
5. Fix storage paths for current repository by clicking the Change link.
6. Specify both location paths that correspond to the volumes with assigned
letters (step 2).
7. Click OK.
8. Refresh the Repositories tab.
Content in the DL Appliance Backup tab is missing after
running the Recovery and Update Utility
Description After you recover your Appliance through the Recovery and Update Utility (RUU)
and restart the AppAssure Core Web Console, content in the Appliance Backup tab
goes missing if a web browser is open while the RUU is running.
Workaround/
Solution
Clear the browser cache, close the browser, and start the AppAssure Core Web
Console.
Provisioning virtual drive for standby Virtual Machine fails
on the second PowerEdge RAID Controller
Description If a repository exists on the first Controller, you cannot provision virtual drive for
standby Virtual Machines on the second PowerEdge RAID Controller. When you
click the Provision tab next to the secondary controller, the following error
message is displayed: DL1300 supports only one repository.
Workaround/
Solution
1. Expand the existing repository with VM creation by upgrading your license.
2. Provision 100% of the 'optional storage reserve' space for standby VM. To do
that: In the optional storage Reserve section, select 100 in the drop-down for
Allocate a portion of the storage being provisioned for
standby VMs, and then click Provision.
At times nonlocalized messages are displayed in the
AppAssure Core and the AppAssure Event log
Description Sometimes nonlocalized messages are displayed in the AppAssure Core (lower-
right corner of the screen) and the AppAssure Event log.
Workaround/
Solution
Restart the Core, WMI and SRM Web Service services, then empty the browser
cache and restart the browser.
15