Release Notes
Table Of Contents
- Dell DL1000 Appliance Release Notes
- Introduction
- Known issues and limitations for Rapid Recovery
- Download DL Appliance Log feature fails
- Some symbols are displayed as numeric codes in the backup link
- VM operation buttons are missing on the VM Management page
- Winbackup feature does not function using the Backup now button
- An incorrect link is displayed in the Backup Status message
- Appliance Backup tab freezes when creating a RASR USB drive
- Error message displayed when creating a RASR USB drive in the Appliance Backup tab
- Error displayed when you click the virtual standby tab
- Cannot recover the DVM repository after remounting volumes if one of the mount points was removed on your appliance
- DVM Repository created in Rapid Recovery 6.0 cannot be mounted in AppAssure 5.4.3
- After upgrading to Rapid Recovery 6.0, Recovery and Update Utility fails to start after a reboot
- On upgrading the Core from AppAssure 5.4.3 to Rapid Recovery 6.0, the Core Console does not launch automatically
- Error displayed when remounting volumes
- Rapid Recovery 6.0 displays an error when ESX(i) host is offline
- Known issues and limitations for AppAssure
- Remount fails for both controllers after a Recovery and Update Utility (version # 184) upgrade and a factory restore
- Content in the DL Appliance Backup tab is missing after running the Recovery and Update Utility
- When remounting volumes on the Provisioning page a new job with an error status is created
- AppAssure Core upgrade fails when performed manually
- Unable to recover the Appliance with Windows Recovery Wizard when booting from a USB drive
- Recovery and Update Utility build 99 fails
- The Remount volumes button on Appliance tab does not remount the repository volume
- At times nonlocalized messages are displayed in the AppAssure Core and the AppAssure Event log
- Do not use underscore in the hostname
- On rebooting your appliance a random drive letter is assigned to the Repository VD
- Dell DL Appliance Applications fail with an error during the Recovery and Update Utility
- Error displayed while creating the RASR USB key
- View Policy in the appliance tab responds slowly
- Error displayed when the hostname of your appliance is configured and added to a domain
- Error message displayed while provisioning storage in AppAssure Appliance Configuration Wizard
- Status of Appliance tab indicator is yellow if the RASR USB drive is not created
- Appliance tab does not have any content
- "Collecting..." message remains on the screen while collecting DL Appliance logs
- Appliance tab loses functionality
- VM Operations buttons for virtual standby are active while VM export is being performed
- Status of Hypervisor information for ESX(i) is shown offline if status for Hyper-V is changed to offline
- Non-RAID 1 configurations are not supported on your appliance
- Installing the wrong RUU causes features in the DL Appliance to hang
- AppAssure Appliance Configuration Wizard fails to complete
- Incorrect message displayed in AppAssure Appliance Configuration Wizard when OpenManage Server Administrator service is disabled
- OpenManage Server Administrator Issues
- OpenManage Server Administrator fails to install properly
- OpenManage Server Administrator fails to update status
- Recovery and Update Utility takes time to complete
- Desktop shortcut for AppAssure not displayed for domain users
- Core console shortcut is not updated with hostname change
- Error message does not close when trying to exit AppAssure Appliance Configuration Wizard
- License key installation failure
- License key installation and AppAssure Appliance Configuration Wizard fails
- Incorrect message displayed for license configuration failure
- Removal Of USB Drive Fails
- Getting help
AppAssure Core upgrade fails when performed manually
Description This issue occurs when trying to upgrade the Core outside the Recovery and
Update Utility (RUU) process.
Workaround/
Solution
Before performing the Core update, stop the following services:
• Dell Storage Management Web Service
• DSM SA Connection Service
• DSM SA Data Manager
• DSM SA Event Manager
• DSM SA Shared Services
Restart the services after the update.
Unable to recover the Appliance with Windows Recovery
Wizard when booting from a USB drive
Description When a USB drive is formatted as a RASR USB drive, the appliance does not
recognize the USB drive and displays it as a Fixed Disk in the operating system.
Workaround/
Solution
Do not use any USB drives that shows up as a Fixed Disk in the operating system.
Recovery and Update Utility build 99 fails
Description Recovery and Update Utility (RUU) build 99 fails on DL Appliances during a Rapid
Appliance Self Recovery (RASR) update.
Workaround/
Solution
Do not use build 99. If you have installed build 99, upgrade to the latest RUU.
The Remount volumes button on Appliance tab does not
remount the repository volume
Description If a mount point is deleted in a repository disk, the Remount volumes button on
Appliance tab does not work.
Workaround/
Solution
To restore the volume mount point:
1. Open the Repository tab and expand the error repository.
2. Copy the repository file path.
3. Open Operating system Disk Manager: Server Manager → Tools →
Computer Management → Disk Management.
4. Find the repository disk, the name of the disk contains repository information.
5. Right-click the disk and select Change drive letter and paths.
13