Release Notes
Table Of Contents
- Dell DL1000 Appliance Release Notes
- Introduction
- Known issues and limitations for Rapid Recovery
- Download DL Appliance Log feature fails
- Some symbols are displayed as numeric codes in the backup link
- VM operation buttons are missing on the VM Management page
- Winbackup feature does not function using the Backup now button
- An incorrect link is displayed in the Backup Status message
- Appliance Backup tab freezes when creating a RASR USB drive
- Error message displayed when creating a RASR USB drive in the Appliance Backup tab
- Error displayed when you click the virtual standby tab
- Cannot recover the DVM repository after remounting volumes if one of the mount points was removed on your appliance
- DVM Repository created in Rapid Recovery 6.0 cannot be mounted in AppAssure 5.4.3
- After upgrading to Rapid Recovery 6.0, Recovery and Update Utility fails to start after a reboot
- On upgrading the Core from AppAssure 5.4.3 to Rapid Recovery 6.0, the Core Console does not launch automatically
- Error displayed when remounting volumes
- Rapid Recovery 6.0 displays an error when ESX(i) host is offline
- Known issues and limitations for AppAssure
- Remount fails for both controllers after a Recovery and Update Utility (version # 184) upgrade and a factory restore
- Content in the DL Appliance Backup tab is missing after running the Recovery and Update Utility
- When remounting volumes on the Provisioning page a new job with an error status is created
- AppAssure Core upgrade fails when performed manually
- Unable to recover the Appliance with Windows Recovery Wizard when booting from a USB drive
- Recovery and Update Utility build 99 fails
- The Remount volumes button on Appliance tab does not remount the repository volume
- At times nonlocalized messages are displayed in the AppAssure Core and the AppAssure Event log
- Do not use underscore in the hostname
- On rebooting your appliance a random drive letter is assigned to the Repository VD
- Dell DL Appliance Applications fail with an error during the Recovery and Update Utility
- Error displayed while creating the RASR USB key
- View Policy in the appliance tab responds slowly
- Error displayed when the hostname of your appliance is configured and added to a domain
- Error message displayed while provisioning storage in AppAssure Appliance Configuration Wizard
- Status of Appliance tab indicator is yellow if the RASR USB drive is not created
- Appliance tab does not have any content
- "Collecting..." message remains on the screen while collecting DL Appliance logs
- Appliance tab loses functionality
- VM Operations buttons for virtual standby are active while VM export is being performed
- Status of Hypervisor information for ESX(i) is shown offline if status for Hyper-V is changed to offline
- Non-RAID 1 configurations are not supported on your appliance
- Installing the wrong RUU causes features in the DL Appliance to hang
- AppAssure Appliance Configuration Wizard fails to complete
- Incorrect message displayed in AppAssure Appliance Configuration Wizard when OpenManage Server Administrator service is disabled
- OpenManage Server Administrator Issues
- OpenManage Server Administrator fails to install properly
- OpenManage Server Administrator fails to update status
- Recovery and Update Utility takes time to complete
- Desktop shortcut for AppAssure not displayed for domain users
- Core console shortcut is not updated with hostname change
- Error message does not close when trying to exit AppAssure Appliance Configuration Wizard
- License key installation failure
- License key installation and AppAssure Appliance Configuration Wizard fails
- Incorrect message displayed for license configuration failure
- Removal Of USB Drive Fails
- Getting help
3
Known issues and limitations for
AppAssure
NOTE: It is recommended that you change the host name by using the AppAssure Appliance
Configuration Wizard. If the configuration has completed, then manually change the computer
name to the previous name.
NOTE: Do not create or delete Virtual Disks on the HDDs. This can create issues with storage
provisioning and/or repository recovery.
Remount fails for both controllers after a Recovery and
Update Utility (version # 184) upgrade and a factory
restore
Description The remount volume was not able to restore the mount point previously used by
the VM volume because the volume letter was reassigned to other removable
devices.
Workaround/
Solution
Remove all removable media from the system and then run Remount Volumes
again.
Content in the DL Appliance Backup tab is missing after
running the Recovery and Update Utility
Description After you recover your Appliance through the Recovery and Update Utility (RUU)
and restart the AppAssure Core Web Console, content in the Appliance Backup tab
goes missing if a web browser is open while the RUU is running.
Workaround/
Solution
Clear the browser cache, close the browser, and start the AppAssure Core Web
Console.
When remounting volumes on the Provisioning page a
new job with an error status is created
Description On remounting volumes on the Provisioning page a new job with an error status is
created. This issue occurs after rebooting the appliance from a Rapid Appliance
Self Recovery (RASR) USB drive and performing a factory reset.
Workaround/
Solution
Remove all USB drives when provisioning.
12