Release Notes
Table Of Contents
- Dell DL1000 Appliance Release Notes
- Introduction
- Known issues and limitations for Rapid Recovery
- Download DL Appliance Log feature fails
- Some symbols are displayed as numeric codes in the backup link
- VM operation buttons are missing on the VM Management page
- Winbackup feature does not function using the Backup now button
- An incorrect link is displayed in the Backup Status message
- Appliance Backup tab freezes when creating a RASR USB drive
- Error message displayed when creating a RASR USB drive in the Appliance Backup tab
- Error displayed when you click the virtual standby tab
- Cannot recover the DVM repository after remounting volumes if one of the mount points was removed on your appliance
- DVM Repository created in Rapid Recovery 6.0 cannot be mounted in AppAssure 5.4.3
- After upgrading to Rapid Recovery 6.0, Recovery and Update Utility fails to start after a reboot
- On upgrading the Core from AppAssure 5.4.3 to Rapid Recovery 6.0, the Core Console does not launch automatically
- Error displayed when remounting volumes
- Rapid Recovery 6.0 displays an error when ESX(i) host is offline
- Known issues and limitations for AppAssure
- Remount fails for both controllers after a Recovery and Update Utility (version # 184) upgrade and a factory restore
- Content in the DL Appliance Backup tab is missing after running the Recovery and Update Utility
- When remounting volumes on the Provisioning page a new job with an error status is created
- AppAssure Core upgrade fails when performed manually
- Unable to recover the Appliance with Windows Recovery Wizard when booting from a USB drive
- Recovery and Update Utility build 99 fails
- The Remount volumes button on Appliance tab does not remount the repository volume
- At times nonlocalized messages are displayed in the AppAssure Core and the AppAssure Event log
- Do not use underscore in the hostname
- On rebooting your appliance a random drive letter is assigned to the Repository VD
- Dell DL Appliance Applications fail with an error during the Recovery and Update Utility
- Error displayed while creating the RASR USB key
- View Policy in the appliance tab responds slowly
- Error displayed when the hostname of your appliance is configured and added to a domain
- Error message displayed while provisioning storage in AppAssure Appliance Configuration Wizard
- Status of Appliance tab indicator is yellow if the RASR USB drive is not created
- Appliance tab does not have any content
- "Collecting..." message remains on the screen while collecting DL Appliance logs
- Appliance tab loses functionality
- VM Operations buttons for virtual standby are active while VM export is being performed
- Status of Hypervisor information for ESX(i) is shown offline if status for Hyper-V is changed to offline
- Non-RAID 1 configurations are not supported on your appliance
- Installing the wrong RUU causes features in the DL Appliance to hang
- AppAssure Appliance Configuration Wizard fails to complete
- Incorrect message displayed in AppAssure Appliance Configuration Wizard when OpenManage Server Administrator service is disabled
- OpenManage Server Administrator Issues
- OpenManage Server Administrator fails to install properly
- OpenManage Server Administrator fails to update status
- Recovery and Update Utility takes time to complete
- Desktop shortcut for AppAssure not displayed for domain users
- Core console shortcut is not updated with hostname change
- Error message does not close when trying to exit AppAssure Appliance Configuration Wizard
- License key installation failure
- License key installation and AppAssure Appliance Configuration Wizard fails
- Incorrect message displayed for license configuration failure
- Removal Of USB Drive Fails
- Getting help
NOTE: Do not launch the Core Console while the RUU is running.
On upgrading the Core from AppAssure 5.4.3 to Rapid
Recovery 6.0, the Core Console does not launch
automatically
Description After upgrading the Core from AppAssure 5.4.3 to Rapid Recovery 6.0, you are
prompted to restart the system. On restarting the system the startAA.vbs script
does not open the Core Console but displays a Windows Script Host error.
Workaround/
Solution
After upgrading to Rapid Recovery 6.0, manually start the Core Console by clicking
the icon on the desktop.
Error displayed when remounting volumes
Description When recovering a DVM repository the following error is displayed: Failed read
consistency lock on IsSpare_AC or
MediaPresent_DiskDriveToStorageExtent_AC Association Cache. The
error occurs when a repository was provisioned on several controllers and one of
the mount points was removed.
NOTE: Ensure you use the PERC H310 controller to provision storage.
Workaround/
Solution
1. Assign drive letters to volumes with storage locations of the repository.
2. Manually restore Core settings or Open Existing Repository through the
Repositories pane specifying valid paths for repositories.
Rapid Recovery 6.0 displays an error when ESX(i) host is
offline
Description After exporting ESX(i) virtual standby, if the state of ESX(i) host is offline, the error:
Unable to connect to the remote server now is displayed.
Workaround If an ESXi server backed Virtual Standbys exist, ensure all hosting ESXi servers are up
and operational.
11