Users Guide

Table 43. Send data options (continued)
Option Text Box Description
At time Select the hour of the day you want to create a daily archive.
10. Optionally, to postpone archiving to resume at a later time, select Pause initial archiving.
NOTE: You may want to pause the scheduled archive if you need time to prepare the target location before archiving
resumes. If you do not select this option, archiving begins at the scheduled time.
11. Click Next.
12. On the Options page, use the Recycle action drop-down list to select one of the options described in the following table:
Table 44. Archive recycle options
Text Box Description
Incremental Lets you add recovery points to an existing archive. It compares recovery points to avoid duplicating data
that already exists in the archive.
Replace this
Core
Overwrites any pre-existing archived data pertaining to this core but leaves the data for other cores intact.
Erase
completely
Clears all archived data from the directory before writing the new archive.
13. Optionally select Build recovery points chains (fix orphans).
14. Click Finish.
Rapid Recovery applies your changes to the archive.
Pausing or resuming a scheduled archive
If you have an archiving job scheduled to recur, you can pause or resume this action as necessary.
There may be times when you want to pause a scheduled archive job, such as if you need to change the destination archive
location. Also, if you opted to initially pause archiving when you performed the Creating an archive on page 82procedure, you
likely want to resume the scheduled archive later. Complete the steps in the following procedure to pause or resume scheduled
archive.
1.
From the Rapid Recovery Core Console, and click the
More menu on the icon bar, and then click Archives.
2. On the Archives page, under Scheduled Archives, do one of the following:
● Select the preferred archive, and then click one of the following actions as appropriate:
○ Pause
○ Resume
● Next to the preferred archive, click the drop-down menu, and then click one of the following actions as appropriate:
○ Pause
○ Resume
The status of the archive displays in the Schedule column.
Forcing an archive job
Using this procedure, you can force Rapid Recovery to perform the archive job on a scheduled archive at any time.
To force an archive job, you must have an archive scheduled on the Core.
1. From the Rapid Recovery Core Console, in the icon bar, click the More drop-down, and then select Archives.
2. On the Archives page, under Schedule Archives, click the drop-down menu next to the archive you want to force, and then
click Force.
Rapid Recovery archives the recovery points according to the settings you chose for that archive, regardless of the
scheduled archive time you set.
86
Working with the DL Appliance Core