Desktop Computer Owner's Manual

Adding Parts 71
Removing a Memory Module
1 Press out the securing clip at each end of the memory module
connector.
2 Grasp the module and pull up.
If the module is difficult to remove, gently ease the module back and
forth to remove it from the connector.
Adding a Memory Module
1 Press out the securing clip at each end of the memory module
connector.
2 Align the notch on the bottom of the module with the crossbar in the
connector.
NOTICE: To avoid damage to the memory module, press the module straight
down into the socket with equal force applied at each end of the module.
securing clips (2)
notch
step 1
memory module
cutouts (2)
connector
step 2
step 3
memory connectors
on system board