Solution Guide

Solving Problems 39
® ®
CHECK THE NETWORK CABLE CONNECTOR— Ensure that the network
cable connector is firmly connected to the connector on the computer and the
network wall jack as shown on the START HERE sheet for your computer.
CHECK THE NETWORK LIGHTS ON THE BACK OF THE COMPUTER—
Green indicates that the network connection is active. If the status light is not
green, try replacing the network cable.
RESTART THE COMPUTER— Try to log on to the network again.
CONTACT YOUR NETWORK ADMINISTRATOR— Verify that your network
settings are correct and that the network is functioning.
x:\ IS NOT ACCESSIBLE. THE DEVICE IS NOT READY— Insert a disk into
the drive and try again.
A FILENAME CANNOT CONTAIN ANY OF THE FOLLOWING
CHARACTERS: \ / : * ? “ < > |— Do not use these characters in
filenames.
NOT ENOUGH MEMORY OR RESOURCES. CLOSE SOME PROGRAMS AND
TRY AGAIN— You have too many programs open. Close all windows and open
the program that you want to use. In some cases, you might have to restart your
computer to restore computer resources. If so, try running the program that you
want to use first.
THE FILE BEING COPIED IS TOO LARGE FOR THE DESTINATION
DRIVE— The file that you are trying to copy is too large to fit on the disk. Try
copying the file to a disk or use a larger capacity disk.