Solution Guide

Triage 25
2 If you have previously created a configuration profile that you want to use,
select the profile and tap or click
Configure using selected profile to initiate
configuration of the Collector; otherwise, tap or click
New to create a new
profile.
NOTE: Figure 2-9 shows the Selected Profile screen at first use of the software
before any profiles have been defined and saved. when you have begun creating
configuration profiles, they will appear in this screen for your use.
NOTE: Navigation from one of the Collector Configuration screens to the next is
accomplished by tapping or clicking the left- and right-arrow buttons at the top and
to one side of the screen.
Figure 2-9. Select Profile
3 Determine the type of acquisition you want to perform, Live or Standard (see
"Standard vs. Live Acquisition" on page 20 for further information on the
difference between Live and Standard Acquisition types), then tap or click
either
Live Acquisition or Standard Acquisition .