User's Manual

NOTE: The NIC Selection option is available only on 11G systems and earlier.

– Primary and Failover Network options

For 12G systems, the Primary Network options for Remote Management (iDRAC7) NIC are: LOM1, LOM2, LOM3,

LOM4, and Dedicated. The Failover Network options are: LOM1, LOM2, LOM3, LOM4, All LOMs, and None.

The dedicated option is available when the iDRAC7 Enterprise License is present and valid.

NOTE: The number of LOMs varies based on the system or hardware configuration.

– Enable IPMI Over LAN

– IP Address Source

– IP Address

– Subnet Mask

– Gateway Address

– Channel Privilege Level Limit

– New Encryption Key (This option is available on Dell PowerEdge 9G systems).

5. Configure the following optional VLAN configuration details:

NOTE: VLAN configuration is not applicable for systems with iDRAC.

– Enable VLAN ID

– VLAN ID

– Priority

6. Configure the following IPv4 Properties:

– IP Address Source

– IP Address

– Subnet Mask

– Gateway Address

7. Configure the following IPv6 Properties:

– IP Address Source

– IP Address

– Prefix Length

– Default Gateway

– DNS Address Source

– Preferred DNS Server

– Alternate DNS Server

NOTE: You can configure the IPv4 and IPv6 address details only if you enable the IPv4 and IPv6 properties

under Additional Configuration.

8. Click Apply Changes.