CLI Reference Guide

Command Groups 99
show interfaces detail Displays the detail for all configured interfaces. UE
show interfaces status Displays the status for all configured interfaces. UE
show interfaces transceiver
Display the optic static parameters as well
as the Dell qualification.
PE
show monitor capture Displays captured packets transmitted or
received from the CPU.
PE
show statistics Displays statistics for one port or for the entire
switch.
PE
show statistics switchport Displays detailed statistics for a specific port or
for the entire switch.
PE
show storm-control Displays the storm control configuration. PE
shutdown Disables interfaces. IC
speed Configures the speed of a given Ethernet
interface when not using auto-negotiation.
IC
storm-control broadcast Enables Broadcast storm control. IC
storm-control multicast Enables the switch to count Multicast packets
together with Broadcast packets.
IC
storm-control unicast Enables Unicast storm control. IC
switchport protected Sets the port to Protected mode. IC
switchport protected name Configures a name for a protected group. GC
show switchport protected Displays protected group/port information. PE
show system internal pktmgr
Displays the configured CPU rate limit for
unknown packets in packets per second.
PE
show system mtu
Displays the configured MTU.
PE
system jumbo mtu
Globally configures the Maximum
Transmission Unit (MTU) on all interfaces
for forwarded and system-generated
frames.
GC
a. For the meaning of each Mode abbreviation, see Mode Types on page 87.
Command Description Mode
a
2CSNXXX_SWUM200.book Page 99 Tuesday, December 10, 2013 1:22 PM