CLI Reference Guide

DHCPv6 Snooping Commands 987
User Guidelines
This command has not user guidelines.
Example
(console)#show ipv6 dhcp snooping
DHCP snooping is Disabled
DHCP snooping source MAC verification is enabled
DHCP snooping is enabled on the following VLANs:
11 - 30, 40
Interface Trusted Log Invalid Pkts
--------- -------- ----------------
Gi1/0/1 Yes No
Gi1/0/2 No Yes
Gi1/0/3 No Yes
Gi1/0/4 No No
Gi1/0/6 No No
show ipv6 dhcp snooping binding
Use the show ipv6 dhcp snooping binding command to display the IPv6
DHCP snooping configuration
Syntax
show ipv6 dhcp snooping binding [{static|dynamic}] [interface interface-id
| port-channel port-channel-id ] [vlan vlan-id ]
• static —Only show static entries.
•
dynamic —Only show dynamic entries.
•
interface-id —Limit the display to entries associated with interface-id .
•
vlan-id —Limit the display to entries associated with VLAN vlan-id .
Default Configuration
This command has no default configuration.
Command Modes
User EXEC, Privileged EXEC (all show modes)
2CSNXXX_SWUM200.book Page 987 Tuesday, December 10, 2013 1:22 PM