CLI Reference Guide

862 802.1x Commands
clear authentication authentication-history
Use this command to clear the authentication history logs.
Syntax
clear authentication authentication-history { interface-id | all}
• interface-id —The interface.
•
all —All interfaces.
Default Configuration
There is no default configuration for this command.
Command Modes
Privileged EXEC mode
User Guidelines
None
Example
console(config)# clear authentication authentication-history Gi1/0/1
show authentication
Use this command to list the authentication methods configured on the
interface and display if the Tiered Authentication feature is enabled.
Syntax
show authentication [interface { interface-id | all}]
• interface-id —The physical interface.
•
all —All interfaces.
Default Configuration
There is no default configuration for this command.
2CSNXXX_SWUM200.book Page 862 Tuesday, December 10, 2013 1:22 PM