CLI Reference Guide

Command Groups 86
Router Discovery Protocol
(IPv4)
Manages router discovery operations.
Routing Information
Protocol
(IPv4)
Configures RIP activities.
Tu n n e l I n t e r f a c e (IPv6) Managing tunneling operations.
Virtual Router
Redundancy
(IPv4)
Controls virtual LAN routing.
Virtual Router
Redundancy
(IPv4)
Manages router redundancy on the system.
Utility Commands
Auto-Install Automatically configures switch when a configuration file
is not found.
Captive Portal Blocks clients from accessing network until user
verification is established.
Clock Configures the system clock.
Command Line
Configuration Scripting
Manages the switch configuration files.
Denial of Service Provides several Denial of Service options.
Line Configures the console, SSH, and remote Telnet
connection.
Management ACL Configures and displays management access-list
information.
Password Management Provides password management.
PHY Diagnostics Diagnoses and displays the interface status.
Power Over Ethernet
(PoE)
Configures PoE and displays PoE information.
RMON Can be configured through the CLI and displays RMON
information.
Serviceability Tracing Controls display of debug output to serial port or telnet
console.
sFlow Configures sFlow monitoring.
Table 1-1. System Command Groups (continued)
Command Group Description
2CSNXXX_SWUM200.book Page 86 Tuesday, December 10, 2013 1:22 PM