CLI Reference Guide

Command Groups 85
QoS Configures and displays QoS information.
Radius Configures and displays RADIUS information.
Spanning Tree Configures and reports on Spanning Tree protocol.
TACACS+ Configures and displays TACACS+ information.
VLAN Configures VLANs and displays VLAN information.
Voice VLAN Configures voice VLANs and displays voice VLAN
information.
802.1x Configures and displays commands related to 802.1x
security protocol.
Layer 3 Commands
ARP (IPv4) Manages Address Resolution Protocol functions.
DHCP Server and Relay
Agent (IPv4)
Manages DHCP/BOOTP operations on the system.
DHCPv6 Configures IPv6 DHCP functions.
DHCPv6 Snooping Configures DHCP v6 snooping and whether an interface
is trusted or untrusted.
DVMRP (Mcast) Configures DVMRP operations.
IGMP (Mcast) Configures IGMP operations.
IGMP Proxy (Mcast) Manages IGMP Proxy on the system.
IP Helper/DHCP Relay Configures relay of UDP packets.
IP Routing (IPv4) Configures IP routing and addressing.
IPv6 Multicast Manages IPv6 Multicasting on the system.
IPv6 Routing Configures IPv6 routing and addressing.
Loopback Interface
(IPv6)
Manages Loopback configurations.
Multicast (Mcast) Manages Multicasting on the system.
OSPF (IPv4) Manages shortest path operations.
OSPFv3 (IPv6) Manages IPv6 shortest path operations.
Table 1-1. System Command Groups (continued)
Command Group Description
2CSNXXX_SWUM200.book Page 85 Tuesday, December 10, 2013 1:22 PM