CLI Reference Guide

Command Groups 84
Administrative Profiles
Commands
Group commands into a profile and assign a profile to a
user upon authentication.
Administrative Profiles Configures and displays ACL information.
Address Table Configures bridging address tables.
Auto-VoIP Configures Auto VoIP for IP phones on a switch.
CDP Interoperability Configures Cisco
®
Discovery Protocol (CDP).
DHCP L2 Relay Enables the Layer 2 DHCP Relay agent for an interface.
DHCP Management
Interface
Configures an interface to obtain an IP address via DHCP.
Dynamic ARP Inspection Configures for rejection of invalid and malicious ARP
packets.
Ethernet Configuration Configures all port configuration options for example
ports, storm control, port speed and auto-negotiation.
Ethernet CFM Configures and displays GVRP configuration and
information.
IGMP Snooping Configures IGMP snooping and displays IGMP
configuration and IGMP information.
IGMP Snooping Querier Configures IGMP Snooping Querier and displays IGMP
Snooping Querier information.
IP Addressing Configures and manages IP addresses on the switch.
IPv6 ACL Configures and displays ACL information for IPv6.
IPv6 MLD Snooping Configures IPv6 MLD Snooping.
IPv6 MLD Snooping
Querier
Configures IPv6 Snooping Querier and displays IPv6
Snooping Querier information.
iSCSI Optimization Configures special QoS treatment for traffic between
iSCSI initiators and target systems.
Link Dependency Configures and displays link dependency information.
LLDP Configures and displays LLDP information.
Port Channel Configures and displays Port channel information.
Port Monitor Monitors activity on specific target ports.
Table 1-1. System Command Groups
(continued)
Command Group Description
2CSNXXX_SWUM200.book Page 84 Tuesday, December 10, 2013 1:22 PM