CLI Reference Guide

836 Voice VLAN Commands
Commands in this Chapter
This chapter explains the following commands:
voice vlan
This command is used to enable the voice VLAN capability on the switch.
Syntax
voice vlan
no voice vlan
Command Mode
Global Configuration
User Guidelines
Not applicable
Default Value
This feature is disabled by default.
Example
console(config)#voice vlan
console(config)#no voice vlan
voice vlan (Interface)
This command is used to enable the voice vlan capability on the interface.
Syntax
voice vlan { vlanid | dot1p priority | none | untagged | data priority {trust |
untrust} | auth { enable | disable} | dscp
dscp }
no voice vlan
voice vlan voice vlan data priority
voice vlan (Interface) show voice vlan
2CSNXXX_SWUM200.book Page 836 Tuesday, December 10, 2013 1:22 PM