CLI Reference Guide

828 VLAN Commands
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example displays how to add the "ip" protocol to the protocol
based VLAN group identified as "2."
console(config)#vlan protocol group add protocol 2 ethertype 0xXXXX
vlan protocol group name
This is a new command for assigning a group name to vlan protocol group id .
Syntax
vlan protocol group name groupid groupName
no vlan protocol group name groupid
• groupid —The protocol-based VLAN group ID, which is automatically
generated when you create a protocol-based VLAN group with the
vlan
protocol group
command. To see the group ID associated with the name
of a protocol group, use the
show port protocol all command
•
groupName —The group name you want to add. The group name can be
up to 16 characters length. It can be any valid alpha numeric characters.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
2CSNXXX_SWUM200.book Page 828 Tuesday, December 10, 2013 1:22 PM