CLI Reference Guide

812 VLAN Commands
Group
Group Name ID Protocol(s VLAN Interface(s)
--------------- ----- ---------- ---- ------------
test 1 IP 1 1/0/1
show vlan
Use the show vlan command in Privileged EXEC mode to display detailed
information, including interface information and dynamic VLAN type, for a
specific VLAN or RSPAN VLAN. The ID is a valid VLAN identification
number.
Syntax
show vlan [id vlanid | name vlan-name ]
• vlanid —VLAN identifier
•
vlan-name —A valid VLAN name (Range 1-32 characters)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
This shows all VLANs and RSPAN VLANs.
console#show vlan
VLAN Name Ports Type
----- --------------- ------------- --------------
1 default Po1-128, Default
Gi1/0/1-48
10 Static
RSPAN Vlan
------------------------------------------------------------------
2CSNXXX_SWUM200.book Page 812 Tuesday, December 10, 2013 1:22 PM