CLI Reference Guide

VLAN Commands 809
• Voice VLAN
It is recommended that the private VLAN host ports be configured as
spanning-tree portfast.
The command displays the following information.
Examples
The following example displays switchport configuration individually for
gi1/0/1.
console#show interface switchport gigabitethernet 1/0/1
Port 1/0/1:
VLAN Membership mode: General
Operating parameters:
PVID: 1 (default)
Ingress Filtering: Enabled
Acceptable Frame Type: All
GVRP status: Enabled
Protected: Enabled
Port 1/0/1 is member in:
VLAN Name Egress rule Type
---- --------- ----------- -----
1 default untagged Default
8 VLAN008 tagged Dynamic
11 VLAN0011 tagged Static
19 IPv6 VLAN untagged Static
72 VLAN0072 untagged Static
Static configuration:
PVID: 1 (default)
Ingress Filtering: Enabled
Acceptable Frame Type: All
Port 1/0/1 is statically configured to:
VLAN Name Egress rule
---- --------- -----------
11 VLAN0011 tagged
19 IPv6 VLAN untagged
72 VLAN0072 untagged
Parameter Description
private-vlan host-
association
Displays VLAN association for the private-VLAN host ports.
private-vlan
mapping
Displays VLAN mapping for the private-VLAN promiscuous
ports.
2CSNXXX_SWUM200.book Page 809 Tuesday, December 10, 2013 1:22 PM