CLI Reference Guide

620 MLAG
User Guidelines
There are no user guidelines for this command.
Example
(console) # show vpc peer-keepalive
Peer IP address …………………………………10.130.14.55
UDP port ……………………………………………………50000
Peer detection ……………………………………Enabled
Peer is detected ………………………………True
show vpc role
Use the show vpc role command to display information about the keepalive
status and parameters. The role of the MLAG switch and the system MAC
and priority are displayed.
Syntax
show vpc role
Default Configuration
There is no default configuration for this command.
Command Modes
Privileged EXEC mode and above
User Guidelines
There are no user guidelines for this command.
Example
(console) # show vpc role
Keepalive admin mode…………… Enabled
Priority……………………………… 100
VPC Role……………………………… Primary
System MAC…………………………… 0001.0002.0003
2CSNXXX_SWUM200.book Page 620 Tuesday, December 10, 2013 1:22 PM