CLI Reference Guide

618 MLAG
VPC id# 1
-----------------
Config mode.................................... Enabled
Operational mode............................... Enabled
Port channel................................... Po2
Local MemberPorts Status
----------------- ------
Gi1/0/23 UP
Gi1/0/24 UP
Peer MemberPorts Status
---------------- ------
Gi1/0/23 UP
Gi1/0/24 UP
show vpc consistency-parameters
Use the show vpc consistency parameters on both MLAG peers to display
MLAG related configuration information in a format suitable for comparison
with the other MLAG peer.
Syntax
show vpc consistency-parameters { global | interface port-channel-number }
• port-channel-number —A valid port-channel identifier (range 1-128).
Default Configuration
There is no default configuration for this command.
Command Modes
Privileged EXEC mode and above
User Guidelines
There are no user guidelines for this command.
2CSNXXX_SWUM200.book Page 618 Tuesday, December 10, 2013 1:22 PM