CLI Reference Guide

MLAG 607
31
MLAG
Dell Networking N2000/N3000/N4000 Series Switches
MLAG enables a LAG to be created across two independent switches, so that
some member ports of a MLAG can reside on one switch and the other
members of a MLAG can reside on another switch. The partner switch on the
remote side can be a MLAG-unaware unit. To the MLAG unaware switch, the
MLAG appears to be a single LAG connected to a single switch.
Commands in this Chapter
This chapter explains the following commands:
clear vpc statistics
Use the clear vpc statistics command to clear the counters for the keepalive
messages trasmitted and received by the MLAG switch.
Syntax
clear vpc statistics {peer-keepalive | peer-link}
clear vpc statistics show vpc consistency-parameters
debug vpc show vpc consistency-features
feature vpc show vpc peer-keepalive
peer-detection enable show vpc role
peer-keepalive destination show vpc statistics
peer-keepalive enable vpc
role priority vpc domain
show vpc vpc peer-link
show vpc brief
–
2CSNXXX_SWUM200.book Page 607 Tuesday, December 10, 2013 1:22 PM