CLI Reference Guide

Port Channel Commands 601
Command Mode
Interface Configuration (port-channel) mode
User Guidelines
This command has no user guidelines.
show interfaces port-channel
Use the show interfaces port-channel command to show port-channel
information.
Syntax
show interfaces port-channel [ port-channel-number ]
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC, Configuration mode and all Configuration submodes
User Guidelines
The command displays the following information.
Example #1
console#show interfaces port-channel
ChannelPorts ChTypeHash Algorithm Typemin-Links
------------------------- -----------------------------------
Po1Inactive: Gi1/0/3Dynamic31
Parameter Description
[
index ] Number of the port channel to show. This parameter is
optional. If the port channel number is not given, all the
channel groups are displayed. (Range: Valid port-channel
number, 1 to 48).
Local Prf An additional field added to support the display of the local
preference.
2CSNXXX_SWUM200.book Page 601 Tuesday, December 10, 2013 1:22 PM