CLI Reference Guide

596 Port Channel Commands
• 7 — Enhanced hashing mode
Default Configuration
The default hashing mode is 7—Enhanced hashing mode.
Command Mode
Interface Configuration (port-channel)
User Guidelines
No specific guidelines.
Example
console(config)#interface port-channel l
console(config-if-po1)#hashing-mode 4
console(config-if-po1)#no hashing mode
lacp port-priority
Use the lacp port-priority command to configure the priority value for
physical ports. To reset to default priority value, use the no form of this
command.
Syntax
lacp port-priority value
no lacp port-priority
• value — Port priority value. (Range: 1–65535)
Default Configuration
The default port priority value is 1.
Command Mode
Interface Configuration (Ethernet) mode
Interface Range mode
2CSNXXX_SWUM200.book Page 596 Tuesday, December 10, 2013 1:22 PM