CLI Reference Guide

594 Port Channel Commands
console(config-if-Gi1/0/6)# channel-group 1 mode active
interface port-channel
Use the interface port-channel command in Global Configuration mode to
enter port-channel configuration mode.
Syntax
interface port-channel port-channel-number
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
Port channel numbers range from 1 to 128.
Example
The following example enters the context of port-channel 1.
console(config)# interface port-channel 1
console(config-if-po1)#
interface range port-channel
Use the interface range port-channel command in Global Configuration
mode to execute a command on multiple port channels at the same time.
Syntax
interface range port-channel { port-channel-range | all}
• port-channel-range — List of port-channels to configure. Separate non-
consecutive port-channels with a comma and no spaces. A hyphen
designates a range of port-channels. (Range: valid port-channel)
•
all — All the channel-ports.
2CSNXXX_SWUM200.book Page 594 Tuesday, December 10, 2013 1:22 PM