CLI Reference Guide

566 LLDP Commands
Fast Start Repeat Count: 3
Device Class: Network Connectivity
show lldp med interface
This command displays a summary of the current LLDP MED configuration
for a specific interface.
Syntax
show lldp med interface {gigabitethernet unit/slot/port | tengigabitethernet
unit/slot/port| all}
• all — Shows information for all valid LLDP interfaces.
Command Mode
Privileged EXEC, Configuration mode and all Configuration submodes
Default Value
Not applicable
Example
console#show lldp med interface all
LLDP MED Interface Configuration
Interface Link configMED operMED ConfigNotify TLVsTx
--------- ------ --------- -------- ------------ -----------
Gi1/0/1 Detach Enabled EnabledEnabled0,1
Gi1/0/2 Detach Disabled Disabled Disabled 0,1
Gi1/0/3 Detach Disabled Disabled Disabled 0,1
Gi1/0/4 Detach Disabled Disabled Disabled 0,1
Gi1/0/5 Detach Disabled Disabled Disabled 0,1
console #show lldp med interface 1/0/1
LLDP MED Interface Configuration
Interface Link configMED operMED ConfigNotify TLVsTx
--------- ------ -------- -------- -------- -------
1/0/1 Up Enabled Enabled Disabled 0,1
TLV Codes: 0- Capabilities, 1- Network Policy
2-Location, 3- Extended PSE, 4- Extended PD, 5-Inventory
2CSNXXX_SWUM200.book Page 566 Tuesday, December 10, 2013 1:22 PM