CLI Reference Guide

Link Dependency Commands 545
27
Link Dependency Commands
Dell Networking N2000/N3000/N4000 Series Switches
Link dependency allows the link status of a group of interfaces to be made
dependent on the link status of other interfaces. The effect is that the link
status of a group that depends on another interface either mirrors or inverts
the link status of the depended-on interface.
Commands in this Chapter
This chapter explains the following commands:
action
Use the action command in Link Dependency mode to indicate if the link-
dependency group should mirror or invert the status of the depended-on
interfaces.
Syntax
action {down|up}
• down —Mirror the depended on interface(s) status.
•
up —Invert the depended on interface(s) status.
Default Configuration
The default configuration for a group is down, i.e. the group members will
mirror the depended-on link status by going down when all depended-on
interfaces are down.
action –
link-dependency group depends-on
add show link-dependency
2CSNXXX_SWUM200.book Page 545 Tuesday, December 10, 2013 1:22 PM