CLI Reference Guide

IP Source Guard Commands 533
----------- -----------
Gi1/0/1 ipv4
Gi1/0/2 ipv4-mac
Gi1/0/3 N/A
Gi1/0/4 N/A
Gi1/0/5 ipv4-mac
Gi1/0/6 N/A
Gi1/0/7 N/A
Gi1/0/8 N/A
Gi1/0/9 N/A
console(config-if-Gi1/0/5)#show ip verify interface gi1/0/5
Interface Filter Type
----------- -----------
Gi1/0/5 ipv6-mac
show ip verify source
Use the show ip verify source command in Privileged EXEC mode to display
the bindings configured on a particular interface or all interfaces.
Syntax
show ip verify source [interface interface-id ]
• interface-id : A valid physical interface or port-channel identifier
Default Configuration
There is no default configuration for this command.
Command Mode
User EXEC, Privileged EXEC mode, Configuration mode and all
Configuration submodes
User Guidelines
This command has no user guidelines.
Example
console#show ip verify source interface gigabitethernet 1/0/1
2CSNXXX_SWUM200.book Page 533 Tuesday, December 10, 2013 1:22 PM