CLI Reference Guide

IP Source Guard Commands 531
ip verify source port-security
Use the ip verify source port-security command in Interface Configuration
mode to enable filtering of IP packets that do not match the source IP address
and the source MAC address bindings in the DHCP snooping database..
Syntax
ip verify source port-security
Default Configuration
By default, IPSG is disabled on all interfaces.
Command Mode
Interface Configuration mode
User Guidelines
Use the no ip verify source command to disable IPSG on an interface.
Example
console(config-if-Gi1/0/1)#ip verify source port-security
ip verify binding
Use the ip verify binding command in Global Configuration mode to
configure static bindings. Use the no form of the command to remove the
IPSG entry.
Syntax
ip verify binding macaddr vlan ipaddr interface
Default Configuration
By default, there are no static bindings configured.
Command Mode
Global Configuration mode
2CSNXXX_SWUM200.book Page 531 Tuesday, December 10, 2013 1:22 PM