CLI Reference Guide

522 IPv6 MLD Snooping Querier Commands
Syntax
ipv6 mld snooping querier
no ipv6 mld snooping querier
Default Configuration
MLD Snooping Querier is disabled by default.
Command Mode
Global Configuration mode
User Guidelines
It is not recommended the MLD Snooping Querier be enabled on a switch
enabled for IPv6 multicast routing.
Example
console(config)#ipv6 mld snooping querier
ipv6 mld snooping querier (VLAN mode)
Use the ipv6 mld snooping querier command in VLAN mode to enable MLD
Snooping Querier on a VLAN. Use the no form of this command to disable
MLD Snooping Querier on a VLAN.
Syntax
ipv6 mld snooping querier vlan vlan-id
no ipv6 mld snooping querier vlan vlan-id
• vlan-id — A valid VLAN ID. (Range: 1–4093)
Default Configuration
MLD Snooping Querier is disabled by default on all VLANs.
Command Mode
Global Configuration mode
2CSNXXX_SWUM200.book Page 522 Tuesday, December 10, 2013 1:22 PM