CLI Reference Guide

518 IPv6 MLD Snooping Commands
Syntax
show ipv6 mld snooping groups [{vlan vlan-id | address ipv6-multicast-
address
}]
• vlan_id — Specifies a VLAN ID value.
•
ipv6-multicast-address — Specifies an IPv6 Multicast address.
Default configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
This user guideline applies to all switch models.To see the full Multicast
address table (including static addresses) use the
show mac address-table
command.
Example
This example shows MLDv2 snooping entries
console#show ipv6 mld snooping groups
Vlan Group Type OIFs
---- ----------------------- ------- ------------------------------------
1 3333.0000.0003 Dynamic Te1/0/1,Te1/0/17
MLD SSM Entries :
-----------------
VLAN Group Reporter Filter IIF Source Address
---- ---------------- ---------------- --------- ---------- ----------------
1 ff1e:2222:2222: fe80::200:3ff:f include Te1/0/1 2001::2
2222:2222:2222: e00:b00
2222:2222
2CSNXXX_SWUM200.book Page 518 Tuesday, December 10, 2013 1:22 PM