CLI Reference Guide

494 IP Addressing Commands
Example
console#show ip address-conflict
Address Conflict Detection Status...Conflict Detected
Last Conflicting IP Address.........10.131.12.56
Last Conflicting MAC Address........00:01:02:04:5A:BC
Time Since Conflict Detected........5 days 2 hrs 6 mins 46 secs
console#show ip address-conflict
Address Conflict Detection Status..No Conflict Detected
show ip helper-address
Use the show ip helper-address command in Privileged EXEC mode to
display IP helper addresses configuration.
Syntax
show ip helper-address [ intf-address ]
• intf-address — IP address of a routing interface. (Range: Any valid IP
address)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
console#show ip helper-address
IP helper is enabled
Interface UDP Port Discard Hit Count Server Address
-------------------- ----------- ---------- ---------- ----------------
vlan 25 domain No 0 192.168.40.2
vlan 25 dhcp No 0 192.168.40.2
2CSNXXX_SWUM200.book Page 494 Tuesday, December 10, 2013 1:22 PM