CLI Reference Guide

IP Addressing Commands 479
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
console#
console#configure
console(config)#clear ip address-conflict-detect
interface out-of-band
Use the interface out-of-band command to enter into OOB interface
configuration mode.
Syntax
interface out-of-band
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration
User Guidelines
No specific guidelines.
Example
console(config)#interface out-of-band
console(config-if)#
ip address (Out-of-Band)
Use the ip address command in Interface Configuration mode to set an IP
address for the out-of-band interface. Use the no form of this command to
return the ip address configuration to its default value.
2CSNXXX_SWUM200.book Page 479 Tuesday, December 10, 2013 1:22 PM