CLI Reference Guide

Ethernet CFM Commands 425
Syntax
show ethernet cfm domain {brief | domain-id }
• domain —Name of the maintenance domain (an alphanumeric string of
up to 43 characters in length).
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
console # show Ethernet cfm domain domain1
Domain Name : domain1
Level : 1
Total Services : 1
---- ----------------------------------- ------------------
VLAN ServiceName CC-Interval (secs)
---- ----------------------------------- ------------------
10 serv1 1
show ethernet cfm maintenance-points local
Use the show ethernet cfm maintenance-points local command in Privileged
EXEC mode to display the configured local maintenance points.
Syntax
show ethernet cfm maintenance-points local {level 0-7 | interface interface-
id
| domain domain-name }
• level —Maintenance association level
•
domain —Name of the maintenance domain (an alphanumeric string of
up to 43 characters in length).
•
interface-id — Show all MPs associated with the interface.
2CSNXXX_SWUM200.book Page 425 Tuesday, December 10, 2013 1:22 PM