CLI Reference Guide
Ethernet Configuration Commands 411
Syntax
show system internal pktmgr internal control sw-rate-limit
Default Configuration
This command has no default configuration.
Command Modes
Privileged EXEC mode
User Guidelines
See the
rate-limit cpu
command for further information on the output of this
command.
Example
console# show system internal pktmgr internal control sw-rate-limit
Inband pps global threshold 1024
show system mtu
Use the show system mtu command to display the configured MTU. The
MTU is set using the global system jumbo mtu command. This command
deprecates the show interfaces mtu command.
Syntax
show system mtu
Default Configuration
The default mtu size is 1518 bytes (1522 bytes for VLAN tagged frames).
Command Modes
Privileged EXEC
User Guidelines
This command has no usage guidelines.
2CSNXXX_SWUM200.book Page 411 Tuesday, December 10, 2013 1:22 PM










