CLI Reference Guide

Ethernet Configuration Commands 397
Te1/0/9 SFP+ 10GBASE-LRM ANF0L5J Yes
Te1/0/11 SFP+ 10GBASE-LRM ANF0L5R Yes
Te1/0/13 SFP 1GBASE-SX PCC1PT5 N/A
Te1/0/15 SFP+ 10GBASE-SR AD1125A002R No
Te1/0/17 SFP+ 10GBASE-SR AD0815E00PC No
show monitor capture
Use this command to display captured packets transmitted or received from
the CPU.
Syntax
show monitor capture [packets]
Default Configuration
This command has no default configuration.
Command Modes
Privileged EXEC mode (all SHOW modes)
User Guidelines
This command has no user guidelines.
Example
console#show monitor capture
Operational Status............................. Enabled
Current Capturing Type......................... Line
Capturing Traffic Mode......................... Tx/Rx
Line Wrap Mode................................. Disabled
RPCAP Listening Port........................... 2002
RPCAP dump file size (KB)...................... 45
console#show monitor capture packets
1/0/1 Length = 94 [RECEIVE]
===================
02:29:23.0000
0000 33 33 00 00 00 01 00 11 88 2f 8e 82 81 00 00 01
0010 86 dd 60 00 00 00 00 24 00 01 fe 80 00 00 00 00
0020 00 00 00 00 88 ff fe 2f 8e 82 ff 02 00 00 00 00
2CSNXXX_SWUM200.book Page 397 Tuesday, December 10, 2013 1:22 PM