CLI Reference Guide

Ethernet Configuration Commands 393
Flow Control: Enabled
Port: Gi1/0/1
VLAN Membership mode: Access Mode
Operating parameters:
PVID: 1
Ingress Filtering: Enabled
Acceptable Frame Type: Untagged
Default Priority: 0
GVRP status: Disabled
Protected: Disabled
Port Gi1/0/1 is member in:
VLAN Name Egress rule Type
---- --------------------------------- ----------- --------
1 default Untagged Default
Static configuration:
PVID: 1
Ingress Filtering: Enabled
Acceptable Frame Type: Untagged
Port Gi1/0/1 is statically configured to:
VLAN Name Egress rule
---- --------------------------------- -----------
Forbidden VLANS:
VLAN Name
---- ---------------------------------
Port Gi1/0/1 Enabled
State: Disabled Role: Disabled
Port id: 128.1 Port Cost: 0
Port Fast: No (Configured: no ) Root Protection: No
Designated bridge Priority: 32768 Address: 001E.C9DE.C52B
Designated port id: 0.0 Designated path cost: 0
CST Regional Root: 80:00:00:1E:C9:DE:C5:2B CST Port Cost: 0
BPDU: sent 0, received
show interfaces status
Use the show interfaces status command in Privileged EXEC mode to display
the status for all configured interfaces.
2CSNXXX_SWUM200.book Page 393 Tuesday, December 10, 2013 1:22 PM