CLI Reference Guide

392 Ethernet Configuration Commands
2/0/1
2/0/2
Ch Description
---- -----------
1 Output
show interfaces detail
Use the show interfaces detail command in Privileged EXEC mode to display
detailed status and configuration of the specified interface.
Syntax
show interfaces detail <interface-id>
• interface-id — A physical interface or port channel identifier.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays detailed status and configuration of the
specified interface.
console(config)#show interfaces detail gi1/0/1
Port Description Duplex Speed Neg MTU Admin Link
State State
--------- --------------------------- ------ ------- ---- ----- ----- -----
Gi1/0/1 N/A Unknown Auto 1518 Up Down
Port Description
--------- ------------------------------------------------------------------
Gi1/0/1
2CSNXXX_SWUM200.book Page 392 Tuesday, December 10, 2013 1:22 PM