CLI Reference Guide

326 DHCP Management Interface Commands
debug dhcp packet
Use the debug dhcp packet command in Privileged EXEC mode to display
debug information about DHCPv4 client activities and to trace DHCPv4
packets to and from the local DHCPv4 client. To disable debugging, use the
no form of this command.
Syntax
debug dhcp packet [transmit | receive]
no debug dhcp packet [transmit | receive]
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC
User Guidelines
DHCP client already has packet tracing. This command turns the packet
tracing on.
Example
The first example is for transmit and receive flows.
console#debug dhcp packet
The second example is for transmit flow.
console#debug dhcp packet transmit
The third example is for receive flow.
console#debug dhcp packet receive
show dhcp lease
Use the show dhcp lease command in Privileged EXEC mode to display IPv4
addresses leased from a DHCP server.
2CSNXXX_SWUM200.book Page 326 Tuesday, December 10, 2013 1:22 PM