CLI Reference Guide

DHCP Layer 2 Relay Commands 319
show dhcp l2relay agent-option vlan
Use the show dhcp l2relay agent-option vlan command in Privileged EXEC
mode to display DHCP L2 Relay Option-82 configuration specific to VLANs.
Syntax
show dhcp l2relay agent-option vlan vlan-range
• vlan-range — Show information for the specified VLAN range. A range may be a
single VLAN ID or two VLAN IDs separated by a single dash with no embedded
spaces.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
There are no user guidelines for this command.
Example
console# show dhcp l2relay agent-option vlan 5-10
DHCP L2 Relay is Enabled.
VLAN Id L2 Relay CircuitId RemoteId
--------- ---------- ----------- ------------
5 Enabled Enabled --NULL--
6 Enabled Enabled broadcom
7 Enabled Disabled --NULL--
8 Enabled Disabled --NULL--
9 Enabled Disabled --NULL--
10 Enabled Disabled --NULL—
show dhcp l2relay vlan
Use the show dhcp l2relay vlan command in Privileged EXEC mode to
display whether DHCP L2 Relay is globally enabled on the specified VLAN or
VLAN range.
2CSNXXX_SWUM200.book Page 319 Tuesday, December 10, 2013 1:22 PM