CLI Reference Guide

Address Table Commands 293
Example
In this example, all classes of entries in the bridge-forwarding database are
displayed.
console#show mac address-table vlan 1
Mac Address Table
-------------------------------------
Vlan Mac Address Type Ports
---- --------------- ------- -------
1 0000.0001.0000 Dynamic gi1/0/1
1 0000.8420.5010 Dynamic gi1/0/1
1 0000.E26D.2C2A Dynamic gi1/0/1
1 0000.E89A.596E Dynamic gi1/0/1
1 0001.02F1.0B33 Dynamic gi1/0/1
Total Mac Addresses for this criterion: 5
show ports security
Use the show ports security command in Privileged EXEC mode to display
the port-lock status.
Syntax
show ports security [{gigabitethernet unit/slot/port| port-channel port-
channel-number
| tengigabitethernet unit/slot/port | fortygigabitethernet
unit/slot/port}]
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
In this example, all classes of entries in the port-lock status are displayed.
console#show ports security
2CSNXXX_SWUM200.book Page 293 Tuesday, December 10, 2013 1:22 PM