CLI Reference Guide

288 Address Table Commands
Syntax
show mac address-table address mac-address [interface interface-id ] [vlan
vlan-id ]
• mac-address — A MAC address with the format xxxx.xxxx.xxxx.
• interface-id — Display information for a specific interface. Valid interfaces
include physical ports and port channels.
• vlan-id — Display entries for the specific VLAN only. The range is 1 to 4093.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC mode, Configuration mode and all
Configuration submodes
User Guidelines
This command has no user guidelines.
Example
In this example, the mac address table entry for 0000.E26D.2C2A is
displayed.
console#show mac address-table address 0000.E26D.2C2A
Vlan Mac Address Type Port
---- -------------- -------- -------------
1 0000.E26D.2C2A Dynamic 1/0/1
show mac address-table count
Use the show mac address-table count command in User EXEC or Privileged
EXEC mode to display the number of addresses present in the Forwarding
Database.
Syntax
show mac address-table count [vlan vlan-id | interface interface-id ]
2CSNXXX_SWUM200.book Page 288 Tuesday, December 10, 2013 1:22 PM