CLI Reference Guide

System Management Commands 1731
SOC Version....................... BCM56846_A1
HW Version........................ 3
CPLD Version...................... 14
unit active backup current-active next-active
---- ----------- ----------- -------------- --------------
1 6.0.0.1 5.1.0.1 6.0.0.1 5.1.0.1
console#show version 2
CPU Version....................... XLP308H-A0
SOC Version....................... BCM56842_B1
HW Version........................ 1
CPLD Version...................... 14
Unit Image 1 Image 2 Current Active Next Active
----- ------------ ------------ ----------------- -----------------
2 6.0.0.1 5.1.0.1 image1 image2
stack
Use the stack command in Global Configuration mode to set the mode to
Stack Global Config.
Syntax
stack
Default Configuration
This command has no default mode.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines. If not stack configuration appears in
the saved config, it is built at runtime and appears in the running config. The
operator can save the stack configuration. Stack members that do not match
the saved config after a reboot will show a config mismatch and do not join
the stack.
2CSNXXX_SWUM200.book Page 1731 Tuesday, December 10, 2013 1:22 PM