CLI Reference Guide

Command Groups 173
clear checkpoint
statistics
Clears the statistics for the checkpointing
process.
GC
clear counters stack-
ports
Clears the statistics for all stack-ports.
PE
connect Connects to the serial console of a different
stack member.
PE
cut-through mode Enables the cut-through mode on the switch. GC
exec-banner Enables exec banner on the console, telnet or
SSH connection.
LC
exit Disconnects the serial connection to the remote
unit.
UE
hostname Specifies or modifies the switch host name. GC
initiate failover Forces failover of management unit. GC
load-interval Loads the interface utilization measurement
interval.
IC
locate Locates a switch by LED blinking. PE
login-banner Enables login banner on the console, telnet, or
SSH connection.
LC
logout Disconnects the serial connection to a remote
unit on a stack member.
UE
member Configures the switch. SG
motd-banner Enables motd on the console, telnet, or SSH
connection.
LC
nsf Specifies non-stop forwarding. GC
ping Sends ICMP echo request packets to another
node on the network.
UE
quit Disconnects the serial connection to the remote
unit on a stack member.
UE
reload Reloads the operating system. PE
set description Associates a text description with a switch in
the stack.
SG
Command Description Mode
a
2CSNXXX_SWUM200.book Page 173 Tuesday, December 10, 2013 1:22 PM