CLI Reference Guide

1724 System Management Commands
User Guidelines
This command has no user guidelines.
Example
console>show system fan
Fans:
Unit Description Status
---- ----------- ------
1 Fan 1 OK
1 Fan 2 OK
1 Fan 3 OK
show system id
Use the show system id command in User EXEC mode to display the system
identity information.
Syntax
show system id [ unit ]
• unit — The unit number.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
The tag information is on a switch by switch basis.
Example
The following example displays the system service tag information.
console#show system id
Service Tag: 13820M0230LF
Serial Number: 13820M0230LF
Asset Tag: none
Unit Service tag Serial number Asset tag
2CSNXXX_SWUM200.book Page 1724 Tuesday, December 10, 2013 1:22 PM