CLI Reference Guide

System Management Commands 1719
Per Unit Status Parameters are explained as follows:
Examples
Example – Stack Status for the Switch
console#show switch 1
Switch............................ 1
Management Status................. Management Switch
Switch Type....................... 0xd8460001
Preconfigured Model Identifier.... N4064
Plugged-in Model Identifier....... N4064
Switch Status..................... OK
Switch Description................ Dell Networking N4064
Detected Code Version............. 6.0.0.0
Detected Code in Flash............ 6.0.0.0
SFS Last Attempt Status........... None
Serial Number..................... CN0H0F6C2829831P0023A00
Up Time........................... 3 days 1 hrs 16 mins 20 secs
Example-Stack Ports
This example displays information about the stack ports.
console#show switch stack-ports
Time Since Last
Copy
When the running configuration
was last copied from the
management unit to the backup
unit.
Time Stamp
Time Until Next
Copy
The number of seconds until the
running configuration will be copied
to the backup unit. This line only
appears when the running
configuration on the backup unit is
Stale.
0 -
L7_UNITMGR_
CONFIG_COPY
_HOLDDOWN
Parameter Description Range Default
NSF Support Whether a unit
supports NSF
Yes or No —
Parameter Description Range Default
2CSNXXX_SWUM200.book Page 1719 Tuesday, December 10, 2013 1:22 PM