CLI Reference Guide

1710 System Management Commands
Example
console>show slot
Admin Power Configured Card
Slot Status State State Model ID Pluggable
----- ------ ------- ------- -------------------------------- ---------
1/0 Full Enable Enable Dell Networking N4032 No
1/1 Empty Disable Disable Yes
show supported cardtype
Use the show supported cardtype command in User EXEC mode to display
information about all card types supported in the system. If a card index is
entered, then the command displays information about specific card types
supported in the system. Card index values are specific to each family of
products. Use the generic form (without specifying an index) to display all the
card types for a product family.
Syntax
show supported cardtype [ cardindex ]
• cardindex — Displays the index into the database of the supported card
types. This index is used when preconfiguring a slot.
Default Configuration
This command has no default configuration.
Parameter Description
Inserted Card Model Identifier The model identifier of the card inserted
in the slot. Model identifier is a 32-
character field used to identify a card.
This field is displayed only if the slot is
full.
Inserted Card Description The card description. This field is
displayed only if the slot is full.
Configured Card Description The description of the card preconfigured
in the slot.
2CSNXXX_SWUM200.book Page 1710 Tuesday, December 10, 2013 1:22 PM