CLI Reference Guide

System Management Commands 1703
show interfaces utilization
Use this command to display interface utilization.
Syntax
show interfaces utilization [ interface-id ]
• interface-id —The physical or port-channel interface.
Default Configuration
There is no default configuration for this command.
Command Modes
Privileged EXEC mode
User Guidelines
This command displays the interface transmit and receive utilization in
bits/sec and packets/sec.
Example
console#show interfaces utilization
Port Interval Rx bits/s Rx packets/s Tx bits/s Tx packets/s
--------- -------- --------------- -------------- --------------- ----------
Gi1/0/1 150 52889696 103299 1968 4
Gi1/0/2 300 0 0 36175328 70654
Gi1/0/3 300 0 0 0 0
Gi1/0/4 300 0 0 0 0
Gi1/0/5 300 856 2 37785736 73799
console#show interfaces utilization gigabitethernet 1/0/1
Port Interval Rx bits/sec Rx packets/s Tx bits/s Tx packets/s
--------- -------- --------------- -------------- --------------- ----------
Gi1/0/1 150 12205152 23835 4568 8
show memory cpu
Use the show memory cpu command to check the total and available RAM
space on the switch.
2CSNXXX_SWUM200.book Page 1703 Tuesday, December 10, 2013 1:22 PM