CLI Reference Guide

1694 System Management Commands
Syntax
set description unit description
• unit — The switch identifier. (Range: 1–12)
•
description — The text description. (Range: 1–80 alphanumeric
characters)
Default Configuration
This command has no default configuration.
Command Mode
Stack Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example displays
console(config)#stack
console(config-stack)#set description 1 “unit 1"
slot
Use the slot command to configure a slot in the system. The unit/slot is the
slot identifier of the slot located in the specified unit. The
cardindex is the
index to the database of the supported card types (see the command
show
supported cardtype
) indicating the type of card being preconfigured in the
specified slot. The card index is a 32-bit integer. If a card is currently present
in the slot that is unconfigured, the configured information will be deleted
and the slot will be reconfigured with default information for the card. The
supported card types are:
• Dell Networking N2024
• Dell Networking N2024P
• Dell Networking N2048
• Dell Networking N2048P
2CSNXXX_SWUM200.book Page 1694 Tuesday, December 10, 2013 1:22 PM