CLI Reference Guide

Syslog Commands 1651
no level
• level — The severity level for syslog messages. (Range: emergency, alert, critical,
error, warning, notice, info, debug)
Default Configuration
The default value for level is info.
Command Mode
Logging mode
User Guidelines
After entering the view corresponding to a specific syslog server, the
command can be executed to set the severity level for syslog messages.
Example
The following example sets the syslog message severity level to alert.
console(config-logging)#level alert
logging cli-command
Use the logging cli-command in Global Configuration mode to enable CLI
command logging.
Syntax
logging cli-command
no logging cli-command
Default Configuration
Disabled
Command Mode
Global Configuration
User Guidelines
See the CLI commands by using the show logging command.
2CSNXXX_SWUM200.book Page 1651 Tuesday, December 10, 2013 1:22 PM